phan mem quan ly nha hang

phần mềm quản lý nhà hàng

 Liên hệ Phòng Kinh Doanh
1
phan mem quan ly nha hang
9.910816 Designed by phudat.net

phần mềm quản lý nhà hàng, phan mem quan ly nha hang, Phần mềm quản lý nhà hàng Phú Đạt

Danh Mục Sản Phẩm

Liên Hê Báo Giá

Vui lòng liên hệ tư vấn, báo giá trên cả nước:

Mr.Hiep

Phone: 0906582528

Email1:hiep.voduc@khaphat.com
Email2:hiep.khaphat@gmail.com

Bài viết mới


    Xem ảnh lớn

    AW-RP2188 Addressable Repeater( bang hien thi)

    Đăng ngày 08-03-2017 04:50:00 PM - 577 Lượt xem

    Giá : 6 900 000 VND / 1 Chiếc

    Wiring system: Four-wire system, power lines (+24V, GND) and RS485 signal lines(485A, 485B) to addressable fire alarm control panel .

    Đánh giá : 0 điểm 1 2 3 4 5

    Chia sẻ :
    Đặt hàng :   Đặt hàng
    AW-RP2188 Addressable Repeater is a mated product of the 2188/2100 series fire alarm control panels.
    The AW-RP2188 fire display panel (display panel for short) is a kind of microprocessor-controlled fire display panel developed by our company. Each display panel is connected to a fire alarm control panel produced by our company via a special RS-485 interface to process and display the data sent from the fire alarm control panel. Each floor of a building may have a display panel installed. When there is a fire alarm on the floor where the display panel is installed, or the neighboring floor above or below it, the display panel will give a horn/strobe alarm and display the floor No., the room No., and some other position information of the fire alarm.
    Features:
    1. Each display panel is connected with a fire alarm control panel via a RS-48 bus. At most 99 display panels may be connected with each RS-485 bus.
    2. The display panels can display fire alarm messages or feedback messages only rather than fault messages, action messages or other messages.  
    3. A fire alarm control panel may be used for setting the display area of a display panel. The set display panel can display the fire alarm messages of the designated area (floor display) only. Note: See the User’s Manual of the fire alarm control panel for the setting method.
    4. It can replace a AW-AFP2100 fire display panel in a 2100 system.
    5. Parameters: 

      1. Executive standard: General Technical Conditions for Fire Indicating Panels (GB17429-1998)
      2. Display capacity: Each display panel can display the fire alarm messages of floors -10~90 and at most 99 fire alarm messages or feedback messages.
      3. Wiring system: Four-wire system, power lines (+24V, GND) and RS485 signal lines (485A, 485B);
      4. Operating environment: Indoor; temperature: -10℃~+50℃; relative humidity: ≤95% (40℃, without condensation);
      5. Power supply: DC 24V ±20 %;
      6. Overall power consumption: <3W;
      7. Contact capacity: Relay dry contacts, normally open or normally closed, capacity: 1.25A/DC30V (resistive load).

    Số ký tự được gõ là 250

    Sản phẩm cùng loại

     

    Video